Sam4s ER-390 SERIES, Operation And Program Manual

Page: 93 / 206

ER-390 Series Service Mode Programming
•
85
Ram Clear & Memory Allocation
1. Turn the key to the S mode and power on the register whilst holding down the
CHEQUE key. Then press the top left, bottom left, top right and bottom
right keys to start the memory allocation procedure.
If you want to allocate memory by default value, Press CASH key only,
Alternatively:
Refer to the chart below . Enter the index number and press the X/TIME key.
X X/TIME
X MEMORY ITEM
1
PLU
2
CLERK
3
GROUP
4
CHECK#
5
SOFT CHECK LINE
6
CHECK TYPE : Hard (1), Soft (0)
7
PRICE LEVEL
8
MIX AND MATCH
9
ELECTRONIC JOURNAL
Note :- ***The number of clerks must be equal to or less than the number of
check# details entered in file 4.
2. Enter the Number to allocate for the Memory Item and Press CASH key.
See the example data table below
N CASH
MEMORY ITEM N
PLU
300 (Max.5000)
CLERK
10 (Max. 99)
GROUP
20 (Max. 99)
CHECK #
15 (Max. 500)
SOFT CHECK LINE
30 (Max. 50)
CHECK TYPE
0(Soft Check), 1(Hard Check)
PRICE LEVEL
1 (Max. 2)
MIX AND MATCH
10 (Max. 100)
ELECTRONIC JOURNAL
3000(Max. 15000)
Default Memory Allocation
3. If you want to finish memory allocation, Enter CASH key with no numeric key
input. If you want to allocate Another memory area, Repeat 3,4 STEP.
CASH