Sam4s ER-390 SERIES Operation And Program Manual Download Page 49

Page: 49 / 206

ER-390 Series

Operating Instructions

•

Waste

The

WASTE

key allows control of inventory by accounting for items that must be removed

from stock due to spoilage, breakage or mistakes. Press the

WASTE

key before entering

wasted items, and then press the

WASTE

key again to finalize. The

WASTE

key may be

under manager control, requiring the control lock to be in the

position. The

WASTE

key

is not allowed within a sale.

1. Press the

WASTE

key. The message

"WASTE" displays at the top of the
screen.

WASTE

2. Enter the item or items that are wasted.

3. Press the

WASTE

key again to total the

wasted items:

WASTE

THANK-YOU

CALL AGAIN

DATE 01/15/2003 WED TIME

08:33

***WASTE***

PLU1

£1.25

PLU2

£1.50

***WASTE***

TOTAL

£2.75

CLERK 1 No.000011

00001

Summary of Contents for ER-390 SERIES















































































































































































































Search results

Summary of Contents for ER-390 SERIES

Reviews:

Related manuals for ER-390 SERIES

Brands by name

Popular brands

Sam4s ER-390 SERIES, Operation And Program Manual

Search results

Summary of Contents for ER-390 SERIES

Reviews:

Related manuals for ER-390 SERIES

Brands by name

Popular brands