76 • Manager Mode (X Mode)
Sam4s ER-260EJ/256EJ OP Manual v1.20
9.
Enter the beginning number in the range of PLU’s you wish to program and then
press
CASH
.
ENTER TO PLU #
0
10.
Enter the ending number in the range of PLU’s you wish to program and then press
CASH
.
11.
The selection menu displays to select
ADD
,
SUB
or
REPLACE
. Note that stock is
kept in decimal units and you must enter new or additional stock to two digits
beyond the decimal. For example: type
1 0 0 0
to enter ten units of inventory.
OPERATOR: ADD(+)
ADD(+)
←
12.
With “ADD (+)” displayed, press
CASH
to enter the number of units you wish to
add to the existing inventory count, or press
CHARGE1
to select subtract:
OPERATOR: ADD (+)
SUB(-)
←
13.
With “SUB (-)” displayed, press
CASH
to enter the number of units you wish to
subtract from the existing inventory count, or press
CHARGE1
to select replace.
OPERATOR: ADD (+)
REPLACE
←
14.
With “SUB (-)” displayed, press
CASH
to enter the number of units you wish to use
as the new inventory count
15.
After entering the ADD, SUBTRACT or REPLACE value, press
CASH
.
16.
To program additional PLU’s repeat from step 4, or press
CLEAR
key to exit the
program.
