136
•
Program Mode Programming
Sam4S ER230 Series Electronic Cash Register AU
Group Programming
5 Group totals are available to accumulate totals of individual PLUs that are assigned to each group.
Each PLU can be assigned to one, two or three different groups.
•
Program 900 - Group Status Programming
allows to assign a group status, i.e. a group
can be set to
not add
to the total of all groups, or a group can be used to designate like
items for kitchen printer assignment.
•
Program 910 - Group Descriptors Programming
to assign a unique descriptor for each
group, so that the group may be easily understood on the group report.
Program 900 - Group Status Programming
1.
Switch to
P
Mode by press
MODE
function key.
2.
To begin the program, enter
9
0
0
, press the
SBTL
key.
0
SBT L
0
9
3.
Enter the number of the group you wish to program; press the
X/TIME
key.
X/T IME
4.
Enter an option digit from the table below, press the
SBTL
key.
N2
SBTL
N1
N3
Address OPTION
VALUE
=
SUM
Group total is added to the total of all groups on the
Group report?
Yes = 0
No = 1
N1
Send to kitchen printer?
Yes = 2
No = 0
No Choice
KP PORT#: R (print a kitchen requisition)
KP PORT#: 1
N2
KP PORT#: 2
0
1
2
4
N3
Print RED on KP?
Yes = 1
No = 0
Ú
Default values have been highlighted in
bold
5.
To program additional groups, repeat from step 3, or press the
CASH
key to finalize the
program.
CASH
