EN
30
GRATING/SLICING DISC
– the disc (17) is
used to grate fruit and vegetables or to slice
them. The function of the disc depends on the
side of its mounting. The drive to the disc is
transmitted via the stem (18).
STEAM
COOKING
BOWL
– thanks to the
container (23) the food
processor can act as a
steamer. It is mounted
on the bowl (8). The
container
has
a
tray (22) so you can increase the amount of
cooked food. The whole is covered with a
lid (21).
STRAINER
– the strainer (7)
allows you to cook loose
products such as rice, groats.
The gaps in the strainer act as
a sieve which drains water
from the cooked products when the strainer is
removed. The measuring cup (20) on the out
-
side of the bottom has a special hook that helps
to lift the strainer from the bowl. You can also
use the strainer for steaming less food.
DRIVE SHAFT
– the shaft (25) is
mounted in the bottom of the bowl. It
is equipped with a silicone seal ensur
-
ing tightness in the bottom of the
bowl. Additional rotary accessories
are mounted on the shaft. The drive
is transferred by the arbour with a unique set of
grapples.
SCALES FUNCTION
– the robot
is equipped with scales enabling
measurement in the range
0-5000g with the accuracy
of 5g. The scales allow for pre
-
cise dosing of ingredients, also
while the programme is running. In addition, the
built-in scales has a zero (tare) function. Access
to the scales function is possible after selecting
the appropriate function or after selecting the
scales shortcut icon –
.
“TURBO” FUNCTION
– allows
you to obtain the maximum
speed “12” of the installed knife
- the food processor acts as a
blender. The function only works
if you hold down the “TURBO”
button.
ATTENTION! Do not exceed 60 seconds at a
time when using the “TURBO” function.
REVERSE ENGINE REVOLU
-
TIONS
– the food processor has
the ability to work at reverse en
-
gine revs at speeds from “1” to
“3”). Properly used reverse revs
improve the work of the knife
and the mixer.
CONTROL PANEL DESCRIPTION
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MAIN MENU
Selecting the
“Recipes”
panel we go to the list
of recipes available in the appliance.
The
“Custom Settings”
panel allows us to use
individual operating modes of the appliance.
Using the
“Automatic Programmes”
panel
we can select the programmes defined in
the appliance.
“Update Appliance”
gives us the opportunity
to download the latest version of recipes
and software. A message about the available
update will appear when you connect to the
Internet.
Summary of Contents for MASTERCHEF EXECUTIVE TERMOROBOT WiFi
Page 42: ... N O T E S 44 ...
