Controller
To control the system the controller has few “easy to use” buttons on a foil
keypad. Simply press desired button.
All information is displayed on a Liquid Crystal Display (LCD) with backlit.
LED Indicators for status of Power, Heat and Program are used to indicate the
main process status.
Buzzer (not visible) is indicating audible Status or Alarm
Keypad & Display
Buttons
S
Up
You can scroll through the menu structure
T
Down
You can scroll through the menu structure
Enter
Confirm a menu selection, Confirm a value input or an answer choice
ESC
Escape Cancel actual operation, Go back in Menu Structure, Quit actual state ….
+
Plus
Increase a value in flashing input fields , Select multiple Choices;
Input Value must flash to make + button operable
-
Minus
Decrease a flashing value, Select multiple Choices;
Input Value must flash to make + button operable
ON/OFF Switch ON or OFF your System. When on LED is lit
LED Indicators
When
lit
: Heat Power is on
When
lit
: You are running a program
When
flashing
: A delayed start for program operation was entered.
Copyright© SalvisLab / Edition 191107
- 11 -
