![background image](http://html1.mh-extra.com/html/salvis/rh-em/rh-em_installation-and-operation-instruction-manual_3639366019.webp)
3 / 9
1. INTRODUCTION
1.1 Product description
Reflector guide column
Adjustable-height heat
reflector equipped with your
choice of tubular or HiLight
heating element.
Insulated, wraparound
handle. Maximum handle
temperature 60°C.
Base plate made of a heat
conducting special alloy
with double-sided chrome
plating for optimum
conservation and
distribution of heat.
Control box
All exterior parts are
made of stainless
steel.
Base plate foot
Storage space for GN
grid and trays 1/1
1.2 Note regarding devices with Hilight
heaters - automatic ON/OFF switching
during operation!
- The hilight heaters are equipped with a
built-in temperature monitoring system.
- This temperature monitoring system limits
the maximum temperature and thus
prevents an overheating of the hilight
heater.
- The device function is not impaired by this.
1.3 Proper use
The unit is designed to be used exclusively
for food preparation:
- preparing gratins
- browning
- keeping food warm
1.4 Danger area
All reflector and plate surfaces become hot
when in operation. Make sure that unit neither
is placed on a combustible surface nor placed
against combustible walls.
1.5 Safety
The device is approved for attended use only.
The food that is being prepared should not
come into direct contact with the heating
elements.
1.6 Conformity
The unit complies with the following
standards:
- General Product Safety Directive
92/59/EC
- CE mark, EC Directives 89/392/EC
- Electromagnet compatibility,
EC Directives 89/336/EC
- Low-voltage directives,
EC Directives 73/23/EC
- Food hygiene, EC Directives 93/43
1.7 Product identification
The name plate with serial number, type
designation and CE mark are on the back of
the upright column.
1.8 Protection class IP20
Not protected against water!