WQ610 / WQ610RF Thermostat
WQ610RF Receiver
1
2
3
4
5
6
7
8
1.
MENU - enter the menu options, press and hold
for 3 seconds to return to main screen without
saving changes.
2.
DOWN - decrease the temperature and move
through the menus.
3.
UP - increase the temperature and move through
the menus.
4.
TICK - confirm changes and enter menus.
Press and hold for 3 seconds to exit User Menu
and save changes. Press and hold to cancel
BOOST feature or temporary override (whilst in
normal screen).
5.
ON - When in Manual Mode, ON will
turn the boiler on.
6.
OFF - When in Manual Mode, OFF
will turn the boiler off.
7.
AUTO - Receiver operates in automatic
mode according to the thermostat.
8.
MANUAL - Receiver output is
controlled by the On/Off slide switch.
Issue Date: Nov 2019
V006
WQ610
Thermostat
WQ610RF
Thermostat
Thermostat supply
230VAC
Lithium Battery (Rechargable)
Thermostat rating max
3 (1) A
-
OpenTherm terminals
A / B
-
Outputs
Voltage free
NO / COM terminals
-
Temperature range
5°C – 35°C
5°C – 35°C
Thermostat display accuracy
0.5°C
0.5°C
ErP control class
Class V
Class V
Radio Frequency
--
2.4 GHz
Dimension [mm]
86 x 86 x 27 [mm]
86 x 86 x 11[mm]
WQ610 Receiver
Receiver supply
230 V AC
Receiver rating max
16 (5) A
OpenTherm terminals
A / B
Outputs
Voltage free NO / COM terminals
Radio frequency
2.4 GHz
Dimension [mm]
98 x 98 x 32[mm]
SALUS Controls plc
SALUS House
Dodworth Business Park South,
Whinby Road, Dodworth,
Barnsley S75 3SP, UK
E: [email protected]
E: [email protected]
SALUS Controls is a member of the Computime Group.
Maintaining a policy of continuous product development SALUS Controls plc reserve
the right to change specification, design and materials of products listed in this brochure
without prior notice.
www.salus-tech.com
For PDF Installation guide please go to www.salus-manuals.com
WQ610RF Wiring Diagram
1. Menu/Settings description
2. Clock 24hr/AM/PM
3. Temperature unit
4. Heating indicator (icon is animating
when there is heating demand)
5. RF Connection indicator
6. Current Temperature / Setpoint
Temperature
7. Holiday mode indicator
8. Temporary override mode
9. Settings icon
10. Battery indicator
11. Schedule program number
12. Schedule mode icon
13. Day indicator/ SET information
DO NOT connect to OpenTherm terminals unless your boiler is OpenTherm Association approved and
has the OpenTherm Logo.
3
2
To activate thermostat, press TICK button
for 3 seconds (RF version) only.
Language ”ENGLISH” is flashing, press
UP or DOWN, choose your language, then
TICK to confirm.
4
Using UP or DOWN, choose the time
format between 24 hr and 12 hr format.
Using UP or DOWN, set the hour and
then press TICK, which will then move
to minutes, that can be changed in the
same way.
5
6
Using UP or DOWN, set the year and then
press TICK.
Using UP or DOWN, set the month and
then press TICK, which will then move
to days, that can be changed in the same
way.
1
2
13
12
11
1
3
4
5
6
7
9
10
8
TX thermostat
Receiver
TX thermostat
Receiver
Terminal
Description
B / A
OpenTherm Communication Wires only
NO
Volt free connection (Switch)
COM
Volt free connection (Common)
L; N
Supply (230 V AC)
Terminal
Description
A/B
OpenTherm Communication Wires only
NO
Volt free connection (Switch)
COM
Volt free connection (Common)
L;N
Supply (230 V AC)
VOLT FREE
OPENTHERM
Installer’s Quick Guide
TX thermostat
5
ITLC helps to improve system efficiency
and end user comfort. Default is ITLC
Radiators
(disabled if Opentherm
connected)
. Press TICK to confirm or
DOWN to see the next option.
6
Press TICK to select the type of heating
control you prefer.
VOLT FREE
Advanced Settings allow the installer / landlord to adjust the thermostat to suit individual installation
requirements. Do not adjust the settings unless you are competent to do so. The Advanced Settings may be
locked by the creation and activation of a 4 digit PIN code. Please keep your PIN safe and secure.
1
Press MENU.
2
3
4
Press TICK to enter Daylight Saving Time
Menu.
Using UP or DOWN, select ON or OFF.
Press TICK to confirm.
Using UP or DOWN, navigate to Advanced
submenu and press TICK.
7
8
If you select NO, thermostat will use
dafult settings and revert to normal
screen.
Once you have properly connected your
thermostat with the OpenTherm terminals
the OT message will be shown on the
screen. For more Opentherm details, go
to the Opentherm: Configuration section.
L
R
T510T
X+
T
hermosta
t
R
T510T
X+
T
hermosta
t
N
M
CO
M
NO
NC
CO
M
NO
NC
OR
MAX
3 (1) A
AC 230 V
R
T510+
T
hermosta
t
R
T510+
T
hermosta
t
L
L
NO
N
N
COM
R
R
ec
eiv
er
R
ec
eiv
er
A
C
230 V
COM
L
L
N
N
NO
A
C
230 V
MAX
16 (5) A
Please ensure the boiler has 230 V switching before wiring in this way.
WQ610 / WQ610RF
Introduction
The SALUS Quantum WQ610 and WQ610RF thermostats are Boiler Plus compatible thermostats,
designed specifically to control central heating boilers and also in the case of the RF versions,
electrical panel heaters. They have our new load compensation (ITLC) software with Volt free
switch and also Opentherm 4.0 connections, so you can choose the method of control to suit
your boiler / installation. Please note that the Boilers need to have an OpenTherm Association
license to be fully compatible with WQ610 range(should you wish to connect to the OpenTherm
terminals A and B). Please verify if this requirement is met with your Boiler Manufacturer.
Safety Information
Use in accordance with national and EU regulations. Use the device as intended, keeping it in
a dry condition. Product is for indoor use only. Installation must be carried out by a qualified
person in accordance with national and EU regulations.
Product Compliance
This product complies with the essential requirements and other relevant provisions of the following EU
Directives: RED:2014/53/EU and RoHS 2011/65/EU. Full text of the EU Declaration of Conformity is available on:
www.saluslegal.com WQ610RF: 2405-2480MHz; <14dBm
WARNING! Always ensure the AC mains power is switched off before installing or working
on any components.
Technical Specification
Button Functions
Power Up and Configuration
LCD Icon Description
WQ610 Thermostat Terminals Description
WQ610RX Receiver Terminals Description
WQ610 Wiring Diagram
Accessing Advanced Settings Menu
The WQ610RF thermostat contains a re-chargeable Lithium battery. When the battery level
is below 10%, the thermostat will display “PLEASE RE-CHARGE BATTERY”. Please re-charge
for a full 24 hours using a standard Micro USB charger. Thermostat operation will not be
affected during the charging period
OPENTHERM
230 V
