Salus OPTIMA, User Manual

Page: 20 / 40

14 Salus
User
Manual
Sliding your finger along any part of the slider ring (the silver circular
ring around the screen) other than the MODE and FAN/HOLD
locations will also change the set point temperature. To increase the
set point, slide clockwise on the circular ring. To decrease the set
point, slide counterclockwise. While sliding, you can slide through the
MODE and FAN/HOLD locations. Lift your finger from the ring when
the desired set point is displayed and it will be saved when the
blinking stops and the screen returns to the Home Screen.
The set point temperature will stay at the selected value until
changed by the buttons or by the connected smart home system.
Setting a HOLD Set Point Temperature
If you would like to have the OPTIMA thermostat ignore set point
temperature changes from the connected home system, you can
place the thermostat on HOLD.
To do this, select the desired set point temperature and press the
FAN/HOLD button while the set point temperature is blinking. The
word
HOLD
will appear in the Label Area to indicate the HOLD state.