Salus OPTIMA, User Manual

Page: 17 / 40

OPTIMA ZigBee Thermostat
11
Initial Configuration
After inserting the batteries, the display will flash all the segments,
followed by the firmware version number, then display
US / CA
with a blinking
US
.
When configuring the thermostat, select the desired option by
pressing the + or – button or using the slider ring to cause the
desired value to blink, then pressing MODE.
Using the table below, select your country, then your type of system.
Blinking Value Description
US United States – Configures thermostat for use in the US.
CA Canada – Configures thermostat for use in Canada
HP Heat Pump
NON-HP Non Heat Pump – Gas, electric, or oil heat
O Heat Pump with O reverse valve
B Heat Pump with B reverse valve
HE Electric Heat
HG Gas or Oil Heat
After the initial configuration, the thermostat will display the Home
Screen, at which point it is ready to be attached to the Mounting Plate.