Salus HTRS230V(30), Full User Manual, Page: 21 / 26

21
3 sec. 3 sec.
6. Installer parameters
To enter installer parameters please follow steps below. Please refer to parameters table description before any changes. Use or buttons to move
up or down between all parameters. Every change/selection confirm by button:
1
3
Use or to choose
code „49”.
Press button to confirm.
Select installer parameter by or
buttons. Use or buttons to
change parameter value.
Confirm choice by button.
4
2
Hold + buttons for 3 seconds
to enter the installer mode.
dXX Function
Parameter
Values
Description
Default
Values
d01 Heating Control
This parameter defines the algorithm of the room temperature control.
0
PWM (Pulse-width modulation) algorithm ensures reduction of overdrive
states and economic operation of the system. It is an advanced algorithm
designed to precisely maintain room temperature.
0
1 SPAN ± 0.25°C (± 0.5°F)
2 SPAN ± 0.5°C (± 1.0°F)
d02 Room temp. offset
-3.0°C to
+ 3.0°C
Offset room temperature measuring is a function which allows user to
recalibrate internal thermostat’s temperature sensor by a given number of
degrees (in the range from -3,0 °C to 3,0 °C in 0,5°C steps).
0.0°C
d05 Cooling Control
1 SPAN ± 0.25°C (± 0.5°F)
2
2 SPAN ± 0.5°C (± 1.0°F)
3