Salus HTRS230V(30), Full User Manual, Page: 20 / 26

20
If we are using this option then
d18 parameter should be set to „1”.
Move in settings using and
buttons.
Confirm by button.
3 sec.
Hold button for 3 seconds to
enter the menu.
Then use and to choose
heating/cooling settings.
Confirm by button.
5.2 Heat/cool mode change
The heating / cooling mode for the thermostat
can be changed manually or automatically via
„CO” terminal. If 230V power is applied to the
„CO” terminal - then thermostat automatically
switches to cooling mode.
Set thermostat for heating using
and buttons.
Confirm by button.
2 1
1 2
By external ON/OFF switch:
MANUALLY:
AUTOMATICALLY:
3
3
HTRS 230
L
N
CO
L
AC 230V
N
T30NC
HTRS 230 KL08 NSB
L
N
CO
L
SL
N
Wejście NSB
/
NSB output
The heating / cooling mode for the thermostat can be changed manually or automatically via „CO” terminal. If 230V power is applied to the „CO” terminal
- then thermostat automatically switches to cooling mode. If you use this function in automatic mode, set the d18 parameter value to „1”.