6. GENERAL FUNCTIONING OF THE CONTROL PANEL
SETUP PREMI
PAG + MAN 10s
ON
THE FOLLOWING SCREEN DISPLAYS:
- MEASURED VOLTAGE
- ABSORBED CURRENT
- SYSTEM PRESSURE
- OPERATING HOURS OF THE MOTOR
AUTOMATIC MOTOR
13.2A 0h
STOP MOTOR
0.0A 0h
400 V 13.2 A
10.5 bar 0h
IGNITION
CONTROL PANEL
THIS SCREEN IS DISPLAYED ONLY IF THE MAINS
SUPPLY WAITING FUNCTION IS ENABLED
IN THE SETUP MENU. TO EXCLUDE THE
WAITING TIME PRESS
RESET
MAINS WAIT. 1 m
RESET TO START
ONLY IN STABLE MANUAL
BUTTON MODE
IT IS USED TO START
THE MOTOR MANUALLY
It is used to scroll through the pages
Pressed in MOTOR STOP status it starts the motor
in manual mode
Pressed it starts the motor in automatic mode
Pressed the motor goes in STOP function
Pressed in case of an alarm it resets it
26
THE FOLLOWING SCREEN DISPLAYS:
- R PHASE CURRENT
- S PHASE CURRENT
- T PHASE CURRENT
N.B.:
ONLY THREE-PHASE VERSION
CURRENT R 13.2A
S 13.2A T 13.2A
400 V 13.2 A
10.5 bar 0h
IF THE MOTHERBOARD DETECTS A
DRY RUNNING CONDITION IT WILL
BE POSSIBLE TO DISPLAY A FOURTH SCREEN
NO WATER
THIS SCREEN IS DISPLAYED WHEN
THE MINIMUM PROBE IS DISCOVERED
WAITING
FILLING
THIS SCREEN IS DISPLAYED WHEN THE
MINIMUM PROBE IS COVERED AND
THE MAXIMUM PROBE IS DISCOVERED
AFTER THE LACK OF WATER