16
Tel: 886.909 602 109 Email: [email protected]
5) Click the [Load Project] button on the soft panel on the right to open the macro project import interface dialog box. And it is
necessary to apply the VBA startup project program corresponding to this software. Select the "ECAL.VBA" file under the software
installation directory (the default installation path is "C:\Program Files\Electronic Calibration 3.3.2\E506B"). Click [Open] to open
the project file.
Note: If you connect to the E5071C, please select the "ECAL.vba" file under the "E5071C" folder in the installation directory. The file
with the same name under the "E5061B" folder cannot be used, and the two cannot be used in common.
6) In the macro setting soft panel, click [Select Macro].
