10
Tel: 886.909 602 109 Email: [email protected]
2.
Access Software
The software control the VNA and the Ecal kit to calibrate the VNA automatically. It can be used for VNAs from different manufacturers
and help to cut the cost.
2.1.
Connection Window
Connection Options
User can choose LAN or GPIB connections. IP address or GIPB address should be provided.
If the controller computer is connected to VNA via LAN interface, please fill in the IP and port number. If the software is installed on
VNA itself, please use IP address 127.0.0.1. Port Number is provided by the VNA manufacturer. Keysight usually use 5025.
If the controller computer is connected to VNA via GPIB cable, please fill in the VNA GPIB address.
Click [Connect] button when the address is configured. Connection states will be shown in Information area.
Information
This area will show the connected VNA information such as manufacturer, model, software compatible or not,VNA connected or not.
[Add Support] check box will be available if the connected VNA is not in the supported VNA list. Select it and the Add Support area on
right will be activated.
Add Support
This area will only be activated when the connected VNA is not in supported VNA list and “Add Support” check-box is selected.
User can select the VNA series which the connected VNA belongs to and click [Add] button. The software will recognize this
connected VNA automatically next time.
Note:
If the connected VNA does not belong to any VNA series listed in Add support area. Please do not add it and contact Saluki.
2.2.
Measurement Window
