Service
EN
GFA-OOT
16
© Saltus Industrial Technique AB - 9839 1814 01
Removing a Fork Adapter
1.
Fasten the GFA module in a vice and loosen the nut.
2.
Remove the tool, together with the adapter, from the to nut.
3.
Fasten the tool in a vice. Loosen and remove the adapter from the fork adapter.
The adapter is fixed with Loctite. Loosening the adapter requires strong force. It is recom-
mended to use a heat gun to facilitate the loosening.
4.
Loosen and remove the bearing shell adapter from the fork adapter.
The bearing shell is fixed with Loctite. Loosening the bearing shell requires strong force. It is
recommended to use a heat gun to facilitate the loosening.
5.
Remove the fork adapter from the angle head.
6.
If applicable, fasten the tool's bearing shell to the angle head. Note: this is not the same bearing shell
as the one for the adapter, in Step 4.
For service tool, see Spare Parts of the tool in question.
Summary of Contents for GFA-OOT
Page 2: ...2 Saltus Industrial Technique AB 9839 1814 01 Table of Contents EN Product Instructions 3...
Page 11: ...GFA OOT EN Service Saltus Industrial Technique AB 9839 1814 01 11...
Page 13: ...GFA OOT EN Service Saltus Industrial Technique AB 9839 1814 01 13...
Page 18: ...Service EN GFA OOT 18 Saltus Industrial Technique AB 9839 1814 01...
