4
Important…Flash Back (i.e. Fire in the Burner Jet)
In the event of a flash back occurring in the burner tube (that is when the flame
burns inside the jet instead of the outside):
Immediately turn off the gas supply at the gas cylinder.
Turn the patio heater itself off at the control switches.
Disconnect the regulator and wait for the heater to cool down (about 5-10 min).
Once cooled, check the burner jet for blockages and follow cleaning instructions
as described under “Cleaning and Care” section.
If, upon relighting, the problem reoccurs, have your unit checked by an
authorized service dealer
2.
HEATER STAND AND LOCATION
The heater is primarily for outdoor use only. Always ensure that adequate fresh
air ventilation is provided.
Always maintain proper clearance to combustible materials, i.e. top 450mm and
sides, 600mm minimum.
Heater must be placed on level firm ground.
Never operate heater in an explosive atmosphere like in areas where petrol or
other flammable liquids or vapors are stored.
To protect heater from strong wind, anchor the base securely to the ground with
screws.
Fortification of base to the ground
450 mm
600 mm