4
OPERATING INSTRUCTIONS
1. Always ensure the switch is set to the OFF position before plugging the unit into the power
outlet.
2. Use the high setting for drying hair, and use the low setting for styling.
3. If the hair dryer stops working for any reason turn it off at once and let it cool down.
4. The switch controls of the hair dryer work as follows:
Speed settings
Heat settings
0=OFF Position
I=LOW: cool to warm temperature.
I=Low: low speed
II=MIDDLE: warm temperature
II=HIGH: high speed
III=HIGH: hot temperature
Cool shot button: If the cool shot button is pressed together with any of the above operations,
the hair dryer will blow out cool air.
5. After use, switch the hair dryer off and then remove the plug from the socket.
CLEANING AND MAINTENANCE
•
This appliance is for household use only and is not user-serviceable.
•
Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary.
•
Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the speed control is set to “0”.
•
It is much easier to clean the accessories directly after they have been used. Wash them in
warm, soapy water, rinse and dry well.
•
The body of the appliance and the stand should be cleaned with a damp cloth. Do not let
water enter the appliance or the stand.
•
Do not use bleach or other abrasive substance or solvents to clean your appliance as it can
be damaging to the finish. To remove stubborn spots/marks, wipe the surfaces with a cloth
slightly dampened in soapy water or mild non-abrasive cleaner. Rinse and dry with a clean,
dry, soft cloth.
