9
nozzle in a counter-clockwise direction. To replace the nozzle, turn it in a clockwise
direction. Tighten it using the holes in the measuring spoon. Always make sure that
the nozzle is firmly tightened. Replace the steaming tube over the nozzle.
The carafe, carafe lid, filter basket, filter cup and reservoir plate can be washed with
warm soapy water, or placed on the TOP shelf of a dishwasher.
Once the unit has cooled completely and all pressure from the unit is relieved,
remove the boiler cap and pour out any remaining water from the water tank.
Replace the boiler cap on the unit. Always empty the unit of all water between uses.
The body of the appliance should be cleaned with a damp cloth.
Do not use bleach or other abrasive substance or solvents to clean your appliance
as it can be damaging to the finish.
Do not immerse the mixer in water or any other liquid, or hold it under a running tap
to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in
soapy water or mild non-abrasive cleaner. Rinse and dry a clean, dry, soft cloth.
DESCALING:
The unit will need to be descaled on a regular basis. You will know it is time to descale
the unit when the brewing time increases. There will also be a build-up of white deposits
on the surface of the brewing head. Ensure the unit is not plugged into a power source.
Fill the water tank with white household vinegar and close the boiler cap. Allow the unit
to stand overnight. Remove the boiler cap slowly and discard the vinegar. Rinse the
water tank thoroughly with clean water at least twice.
TO CLEAN RESIDUE FROM THE FROTHING NOZZLE:
Follow the cycle to make espresso, but do not put any ground coffee into the filter cap,
and use white household vinegar instead of water. Half way through the cycle, slowly
turn the selector control knob to frothing. Allow the unit to steam for about 5 seconds and
then turn the selector control knob to the “cup” position and allow the rest of the vinegar
to pump out. Allow the unit to cool. Repeat the above process twice using clean tap
water to rinse the unit of vinegar, allowing the unit to cool between rinses.
