Turntable Assembly
1. Turntable drive shaft
2. Roller Ring
3. Glass Tray
4. Hub (underside of glass tray)
Center the Roller Ring over the Turntable Shaft on the floor of the microwave
oven. Install the Glass Tray, centering the Hub over the Turntable Shaft. Turn
the Glass Tray slowly until the Hub engages on the Turntable Shaft.
• Never place the glass tray upside down. The glass tray should never
be restricted.
• Both the Glass Tray and Roller Ring must be used during cooking.
• Place all food and containers with food on the Glass Tray for cooking.
• Verify that the Glass Tray is properly engaged and rotating by observing
its rotation when you press Start.
NOTE:
The Glass Tray can turn in either
direction.
NOTE:
If the Glass Tray or Roller Ring cracks or breaks, contact SWG Canada
See Warranty section.
OPERATING INSTRUCTIONS
Setting the Clock
1. When the microwave oven is plugged into the outlet, the oven will
display “0.00”
2. Press CLOCK keypad, and the LED will display 00:00.
3. Press the number keypads and enter the correct time (always use 4 digits).
For example, to set the time of 5 hours and 9 minutes, press the numbers 0,
5, 0, 9, one at a time. The time range should be between 1:00 – 12:59.
4. Press the Clock Button to confirm the setting.
12
3
4
1
2
Ill. 2
Booklet_MW-2078_Eng.qxd:Salton Booklet 4/30/10 11:42 AM Page 12
