CARE & CLEANING
1. Wipe the Motor Base with a damp cloth. NEVER IMMERSE THE
MOTOR BASE OR PLUG IN WATER OR ANY OTHER LIQUID.
2. All parts except the Motor Base should be washed in warm
soapy water. Do not use abrasive cloths or cleansers. You may
also use a dishwasher (top rack only) low heat setting.
IMPORTANT:
Use extreme caution when handling the Cones.
The Cone blades are extremely sharp. Always hold the plastic
parts.
3. For best results cleaning the 3-in-1 Frozen Dessert
Maker/Slicer/Grater immediately after each use will reduce stains
but carrots or other strong colours in food may still stain the
parts. We suggest using one of the following cleaning
procedures:
a) Soak in mild soapy water
b) Equal parts warm water to cider vinegar
c) Soak in ½ box of baking soda and warm water
d) ½ cup bleach in a sink full of warm water
4. Dry all parts thoroughly before assembling.
The cones can be stored in the Food Pusher (H) and covered
with the Storage Accessory for Cones (K).
NOTE:
Only 4 cones
can be stored in the Food Pusher, the last cone is stored in the
Feed Tube/Cone Holder (I)
5. Any other servicing should be performed by an authorized
service representative.
9
Booklet_DS1457_Salton Booklet 7/21/14 9:13 PM Page 9