OWNER’S MANUAL V.032022 ENGLISH
M-9540 BIKE KOR
This manual can be downloaded from the customer area on
www.salter.es
ASSEMBLY INSTRUCTIONS
STEP 4 – Connection Wire Assembly
Plug the
Connection Wire C (89)
into the
Connection Wire B (88).
Be careful not to pinch the wires.
STEP 5 – Upright Post Assembly
a. Refer to the drawing on the right, insert the
Upright Post (56)
into the
Main
Frame (1)
and make sure the upright post’s welded bolts go into the screw
hole of the front bracket located in front of the main frame. And slightly attach
2pcs Nylon Nuts (M10xp1.5)(112)
. Note: please do not fully secure
2pcs
Nylon Nuts (M10xp1.5)(112)
first for letting the Upright Post to assemble
properly.
b. First fully secure with 2pcs
Bolts (M10xp1.5x20mm)(142)
at the front of the
Upright Post (56)
. Then go back to fully tighten with
2pcs Nylon Nuts
(M10xp1.5)(112)
.
STEP 6 – Upright Post Sleeve Assembly
Attach the
Left Upright Post Sleeve (63)
and the
Right Upright Post Sleeve (64)
to the
Upright Post (56)
and
secure
with 4pcs
Bolts (M5xp0.8x15mm)(126).
