OWNER’S MANUAL V.032022 ENGLISH
M-9540 BIKE KOR
This manual can be downloaded from the customer area on
www.salter.es
ASSEMBLY INSTRUCTIONS
STEP 10 – Handlebar Decoration Cover Assembly
Attach the
Front Handlebar Decoration Cover (61)
and the Rear Handlebar
Decoration Cover (62)
to the
Upright Post (56)
and secure with 4pcs
Screws (M4x20mm)(118)
and 3pcs
Bolts (M5xp0.8x15mm)(126).
STEP 11 – Hand Wrist Pad Assembly
Attach the Hand Wrist Pad (49) to the Stationary Handlebar (48) and secure with 2pcs Washers (6x13x1.0t)(153),
2pcs Lock Washers (M6)(96), 2pcs Bolts (M6xp1.0x12mm)(154).
STEP 12 – Accessory Tray & Pedal Assembly
NOTE:
For shipping purpose, 2pcs
Bolts (M5xp0.8x25mm)(127)
are attached on the
Upright Post (56).
a. Remove 2pcs
Bolts (M5xp0.8x25mm)(127)
from the
Upright Post (56).
b. Place the
Accessory Tray (60)
on the
Upright Post (56)
and fully secure with 2pcs
Bolts
(M5xp0.8x25mm)(127)
.
c. Thread the
Right Pedal (45)
clockwise onto the
Right Crank
located inside the
Right Crank Cover (43)
as
shown. Tighten the pedal securely. Repeat the same procedure to thread and tighten the
Left Pedal (44)
counter-clockwise onto the
Left Crank
as shown.
For the final step, make sure all the bolts and nuts are tighten securely before using.
