OWNER’S MANUAL V.032022 ENGLISH
M-9540 BIKE KOR
This manual can be downloaded from the customer area on
www.salter.es
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning.
STEP 1 – Leveler & Stabilizer Assembly
a. Attach 4pcs
Levelers (85)
to the
Front Stabilizer
(82)
and the
Rear
Stabilizer (86).
b. Be sure to tighten the
Levelers (85)
securely against the
Stabilizers (82,
86)
until screw lines are eliminated as the
drawing 1
shown on the top
right corner.
c. In order to assemble the
Stabilizer (82, 86)
smoothly, it is suggested to
place one Styrofoam (or any stationary object) under one side of the
Main Frame (1)
.
d. Attach the
Front Stabilizer (82)
onto the
Main Frame (1)
and secure with
2pcs
Washers (8x38x2.0t)(99)
, 2pcs
Lock Washers (M8)(97)
and 2pcs
Bolts (M8Xp1.25x60mm)(139)
.
e. Attach the
Rear Stabilizer
(86)
onto the
Main Frame (1)
and secure with
2pcs
Washers (8x38x2.0t)(99)
, 2pcs
Lock Washers (M8)(97)
and 2pcs
Bolts (M8Xp1.25x60mm)(139)
. NOTE: If the item is not level, review the
LEVELING NOTE
on the right side to level the
Levelers (85).
Detailed Lever- drawing 1
Detailed Lever- drawing 2
LEVELING: After placing the
equipment in the intended location
for use, check the stability of the
equipment. If the equipment is not
level, reviewing the following
direction:
-Loosen the Leveler (85) to make
the Adjustment Plate become less
tight.
-Adjust the Leveler (85) for
leveling.
-Tighten the Adjustment Plate
securely against the Stabilizer to
lock the Leveler (85) in stable
position as the drawing 2 shown.
Stabilizer
Adjustment Plate
Leveler (85)
Adjustment Plate
Stabilizer
Screw line
Leveler (85)