PRO
2
check
®
Ultrasonic Oxygen Indicator
WARNING NOTES
USAGE:
The
PRO
2
check
®
Ultrasonic Oxygen Indicator is designed for
intermittent usage to determine the
oxygen concentration
produced by an
oxygen concentrator. It may also be utilized to do spot checks of gaseous or
liquid oxygen. This instrument has no clinical diagnostic or therapeutic
functions.
WARNING:
The unit is not designed nor intended for use in anesthesia
applications, or for monitoring oxygen concentration from any source other
than a conventional oxygen concentrator using molecular sieve beds. This unit
will not withstand fluid spillage. The unit will not withstand mechanical shock
or vibration.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and if not installed in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna
Increase the distance between the equipment and receiver.
Connect the equipment into an electrical outlet on a different
circuit from which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1
