24
APD-100 Automatic Powder Dispenser User Instructions
Configuration
5 Configuration
The following sections deal with configuring or setting up the operation of the APD-100
to best suit your particular needs. Figure
shows the structure of the User and
Configuration menus. Refer to it as needed.
Figure 5.1 Menu structure
5.1 Setting Parameters
Follow the steps in this section to access the parameters that control the functions of
the APD-100.
1.
Press and hold the
SETUP
key until…
USER
is displayed. There are two menus containing parameters. One is
for the end user (
USER
) and the other is for configuration (
CONFIG
) of
the unit.
2.
Press the
FAST/^
or
TRICKEL/v
key to toggle between
USER
and
CONFIG
.
3.
Press the
ENTER
key to accept the displayed choice…
The unit enters the chosen menu.
4.
If you chose
USER
in step
. If you chose
CONFIG
in step
.
5.
After making your choices in the menus, press the
EXIT
key to exit the menu
and return to standard weighing mode.
After the parameter is modified and confirmed by pressing
ENTER
above to save the setting!
