Salora ELITE 1, Instruction Manual

Page: 9 / 29

15
SD CARD MODE
Secure Digital (SD or SDHC) cards can be used with the device for playback of MP3 or WMA files.
SD or SDHC cards up to 16GB are supported. However, there are many different cards variants avail-
able and not all cards can be guaranteed to work in the device. SD or SDHC cards must be formatted
using the FAT or FAT32 filing system in order to operate with the device.
Inserting and removing a card
To insert a SD/SDHC card into the device, push the card with its label side facing outwards and gold
contacts first into the
SD card socket .
To remove the card, push the card slightly and it will pop out allowing removal.
1. To select SD card mode, repeatedly press the Function button until “SD” is shown on the display.
Playback control in SD card mode is similar to CD MP3/WMA mode, please refer to CD mode. MP3/
WMA files are played back in the order that they are written to the SD card by your computer, except
when Random playback is selected.
AUXILIARY INPUT MODE
The device has an auxiliary input mode for listening audio signal from an external audio device, such as
iPod, MP3 player, CD player, etc.
1. Connect a stereo or mono audio source to the Auxiliary Input socket (Ø3.5mm) provided on the
side of the device.
2. Switch on the device, and press the Function button to select “AUX” as the input source.
3. Adjust the volume of your player and the device for comfortable listening.
16
ALARM FUNCTION
The device has an alarm function which can be set to wake you to buzzer, radio, CD or SD card input
source. The alarm duration is 90 minutes.
Setting the alarm time
1. With the device switched off, press and hold the
Alarm button
until the hour digits flash on the
display.
2. Press the
Rewind or Forward butto n to set the hour, and then press the Alarm button to confirm.
– Display: the minute digits flashes.
3. Press the Rewind or Forward button to set the minute, and press the Alarm button to confirm.
– Display: the alarm source flashes.
4. Press the Rewind or Forward button to set the alarm source between “CD”, “SD CARD”, “FM
RADIO” and “BUZZER”.
5. If you select “CD” or “SD CARD”, the symbol “ ” flashes on the display, press the Alarm button
to confirm.
If you select “BUZZER”, the symbol “ ” flashes, press the
Alarm button
to confirm.
If you select “FM RADIO”, the symbol “ ” flashes. You should also select the desired preset
station by using the Up or Down button , and then press the Alarm button to confirm.
6. Set the alarm volume by using the Volume button .
7. Press the
Alarm button
to confirm and finish the setting.
– Display: the current time and the symbol “ ” or “ ” lights on.
Notes:
If no button is pressed for more than 5 seconds during the setting, the device will quit the process auto-
matically, and you have to start again.
If you select “CD” or “SD card” as the alarm source, make sure that a CD or SD card has been inserted.
Otherwise there will be no alarm signal.
Viewing the alarm time
1. In standby mode, repeatedly press the
Alarm button to cycle through the alarm settings.
You may change the settings according to the procedures of “ Setting the alarm time”.
Interrupting the alarm
1. During the alarm is sounding, press the
Snooze button .
– The alarm signal stops.
– The alarm goes off again at 5-minute intervals (overall alarm duration is 90 minutes).
Cancelling the alarm for the day
1. Press the
On/Off button when the alarm is sounding.
– The alarm remains activated for the next day.
Switching off the alarm for the weekend
You can switch off the alarm function over the weekend while the alarm setting is saved.
1. Switch off the alarm function with
WEC button
on the remote control.
2. Press the WEC button again to reactivate the alarm function for weekend.
Activating and deactivating the alarm
1. To deactivate the alarm, briefly press the
Alarm button in standby mode. The alarm symbol
disappears on the display.
The alarm setting is saved.
2. To activate the alarm, briefly press the Alarm button again in standby mode. The display shows the
alarm symbol.