Salon British REVAMP Professional PROGLOSS AUTO WAVE &..., User Manual

Page: 3 / 28

CORRECT! Appliance is facing the correct
way towards the front (B).
WRONG! Appliance is back to front (C)
D
• Press and hold the curling button and the hair will be automatically drawn into the
heated barrel. Keep holding the button while the hair is curled around the barrel and
until you hear the beeps (D).
• The first beep is heard after 10 seconds which is sufficient
time to curl finer hair. For thicker hair or larger sections, allow
up to a maximum of 30 seconds (5 beeps)
• After the desired time, release the button and wait for the
barrel to stop rotating before lowering the appliance from
the hair to release your curl.
• Caution! When the curling mechanism has stopped, always
pull the product downwards to release the curl.
B
SETTING HAIR TYPE TEMPERATURE
1 1 beep 10 seconds
2 2 beeps 15 seconds
3 3 beeps 20 seconds
4 4 beeps 25 seconds
5 5 beeps 30 seconds
• Repeat for each hair section, allowing each curl time to cool in between.
• After 5 beeps, the rotating mechanism will automatically stop.
• After use, switch off the appliance, unplug and allow to cool before storing away.
• Caution! If the appliance is used incorrectly, it can get stuck. Should a tangle occur,
firstly turn the appliance off and then pull the product downwards until the hair is fully
released.
• Repeat for each hair section, allowing each curl time to cool in between.
• After use, switch off the appliance, unplug and allow to cool before storing away.
Follow us on www.revamphair.com for the latest hair tips and advice.
Please note:
• To prevent hair damage, do not curl the same section of hair more than twice
• As with all heated appliances, avoid frequent use to prevent damage to the hair
• Avoid over use of styling products as this may deteriorate the coating on the barrel.
• The barrel end of the appliance gets very hot during use. To avoid burns, keep the barrel
away from direct contact with the head and only hold the appliance by the handle.
During and after use, place on a heat-resistant surface.
• Do not scratch the surface of the curl barrel as this will deteriorate the effectiveness of
the coating.
• While heating, during use and cooling, place on the REVAMP heat-resistant mat. Only
hold the product by the cool handle.
• The product reaches a very high temperature during operation, please style with
caution when using. Make sure to keep away from the scalp and skin to avoid burns.
C