13
INSTALLATION
The installation must be carried out by a suitably qualified person,
in accordance with the with the manufacturer’s instructions, and
abide all by local electrical rules and specifications.
WARNING: this appliance must be earthed.
Before connecting the appliance, make sure that the supply voltage marked on the
Rating Plate corresponds with your mains supply voltage.
This appliance should be wired into a 13 A double pole switched fused spur outlet, having 3mm
contact separation and placed in an easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your oven is located in its housing to enable the
appliance to be disconnected from the mains supply.
•
To connect the oven power cord, loosen and remove the cover on the terminal block, in
order to gain access to the contacts inside. Make the connection, securing the cord in place
with the cable clamp provided and then immediately close the terminal block cover again.
•
If you have to change the oven power cord, the earthing (yellow/green) conductor must
always be 10 mm longer than the line conductors.
•
Care must be taken to ensure that the temperature of the mains supply cable does not
exceed 50°C.
•
If the mains supply cable is damaged, then it must be replaced by an appropriate
replacement which can be obtained from Spares Department.
