background image

-14- 

 

DECLARATION OF CONFORMITY 

 

Australian Standards 

 
This product has been designed and manufactured to comply with all relevant Australian 

and New Zealand Standards. 
 

AS/NZS 60335.1 General Requirements for Domestic Electrical Appliances 

AS/NZS 60335.2.6 Specific Requirements for Domestic Electrical Cooking Appliances 
This appliance is SAA certified 

 
Installation of the appliance must be only be undertaken by a licenced electrician who can 

provide a compliance certificate. 

 
This appliance is intended for domestic use only. 

 
 

European Standards 
 

o

 

CE: Appliance conforming to the European 2004/108/EC EMC Directive. 

                                                             

o

 

The manufacturer declares that the oven is built using certified materials and 

requires the appliance to be installed in accordance with the standards currently in 
force. This appliance must be used by a trained person for domestic purposes only. 

 

*

 

The RoHS directive stands for “the restriction of the use of certain hazardous 
substances in electrical and electronic equipment”. This directive bans the placing on 

the EU market of new electrical and electronic equipment containing more than the 
agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated 

biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants. 

 
European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) (for 

European Union countries only) 
 

This appliance is marked according to the European directive 2002/96/EC on Waste 

Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of 
correctly, you will help prevent potential negative consequences for the environment and 

human health, which could otherwise be caused by inappropriate waste handling of this 
product. 

The symbol on the product, or on the documents accompanying the product, indicates that 

this appliance may not be treated as household waste. Instead it shall be handed over to 
the applicable collection point for the recycling of electrical and electronic equipment. 

Disposal must be carried out in accordance with local environmental regulations for waste 
disposal. 

For more detailed information about treatment, recovery and recycling of this product, 

please contact your local city office or your household waste disposal service.

  

 

Summary of Contents for SCI-4052B

















Reviews: