Salini SCI-4052B, Instruction Manual

Page: 11 / 16

-10-
Installing the Induction Cooktop
WARNING: Be careful of cutting edges. End parts are in foamed plastic.
During unpacking these components could cause slight injuries or cuts.
Step 1: Put a towel or cloth on the work surface. Place the hob face down on the protected
surface.
Step 2: Apply the strip seal, supplied with the hob, which is for sealing it onto the work surface.
Do not use silicone. Apply the seal to the edge of the bottom of the hob, about 3mm from the
edge of the glass. Apply the seal all around the circumference. Cut any excess and bring the two
ends of the seal together so they match.
Step 3: Use the screws to fasten the four brackets, centre the hob in the space cut out of the
work surface.