-8-
Residual heat indicator
After a zone is switched off, the corresponding cooking zone
indicator (10) or (11), (12), (13) will show a flashing letter “H”.
This means that the temperature of the zone is over 60°C and is
therefore still high enough to cause injury.
When the temperature of the zone falls below 60°C, then the letter
“H” will go out.
IMPORTANT:
The residual heat indicator will disappear if the mains supply to the product is
cut.
CAUTION:
It is still possible to burn yourself on a hob zone, even when the temperature
of it has dropped below 60°c.
Locking the hob top
The whole hob top can be locked by pressing the safety lock button
(8) whilst the appliance is switched on.
The timer display (14) will show “L0” to indicate that the safety
lock feature has been activated.
When the safety lock has been switched on, it will disable any of
the other buttons on the control panel, apart from the ON/OFF
button (7).
To disable the safety lock feature, you should press the safety lock
button (8) again. The “L0” symbol will disappear from the timer
display (14) and you are then able to adjust the power of any zone
on the hob top.
The hob timer
Your hob has a timer which will countdown a period of time between 1 and 99 minutes. At the
end of the countdown period an audible signal will sound.
Press the timer button (6), use the plus buttons (9) and minus
buttons (5) to set the countdown time.
The timer display will show the countdown time that is being set.
The timer display will increase in 1 minute intervals each time the
timer plus button (9) is pressed.
The timer display will decrease in 1 minute intervals each time the
timer minus button (5) is pressed.
If the set time exceeds 99 minutes, the timer display will return to
showing 0.
If you press the plus (9) and minus buttons (5) simultaneously,
the timer display will reset to 0.