Salicru EQUINOX BATT EQX2 BATT, User Manual

Page: 31 / 40

31
EN
Fig. 11. Location of the battery modules.
2.
Install the fastening elements on both sides of the control
module.
Fig. 12. Installing the fastening elements.
3.
Use the fastening elements as a template to mark the position
of 4 holes in the wall.
Fig. 13. Marking the position.
4.
Remove the control module.
Fig. 14. Removing the control module.
5.
Use an electric drill with a 10 mm diameter drill bit to drill
4 holes in the wall to a depth of 8 mm.
Fig. 15. Drilling of holes.
6.
Insert the plugs into the drilled holes.
Fig. 16. Inserting the plugs.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID USER MANUAL