Salicru ADVANCE 1000-HV, User'S Manual, Installation And Start-Up

Page: 7 / 40

- 7 -
2.2.- Standard.
The UPS product ADVANCE series is designed, manufactured and commercialized in accordance with the standard EN ISO
9001 of Quality Assurance. The marking shows the conformity to the EEC Directive (quoted between brackets) by means
of the application of the following standards:
• 2006/95/EC of Security of Low Tension.
• 2004/108/EC of Electromagnetic Compatibility (CEM).
according to the specifications of the harmonious standards. Reference of standards:
• IN 60950-1 : Equipments of technology of the information. Security. Part(report) 1: General Requirements.
• IN 61000-6-3 : Electromagnetic Compatibility. General emission standard. Residential, commercial and light industry
environments.
• IN 61000-6-2 : Electromagnetic Compatibility. Generic standard of immunity. Industrial environment.
When a UPS of ADVANCE series is used as part or component of a complex system or installation, the Generic or Product
standards of that installation or specific system must be applied.
It is possible that when adding parts, or being under the requirements of a specific standard, all the parts have to be under
corrections to assure the conformity with the European Directives and the corresponding national regulations.
It is responsi-
bility of the project Manager and/or Fitter, the compliance of the standard , providing to the installation all the needed
parts to comply the standard.
Furthermore, the interference phenomena due to input harmonic currents exists, and although it is not regulated by these
standards, it is necessary to correct them in some installations.
Depending on the installation conditions of UPS
ADVANCE series, the corrections described in the Electromagnetic Compat-
ibility have or do not have to be done. For all the versions and regarding the Safety (standard EN 60950-1 ) has to be kept in
mind the aspects of the Product detailed in the INSTALLATION section.
2.3.- Safety and first aid.
• Together with the equipment and this «User and installation manual», it is provided the information relating to «Safety
instructions» (See document EK266*08). Before proceeding to the installation or commissioning, check that both infor-
mation are available; otherwise request them. It is compulsory the compliance of the «Safety instructions», being the user
the legal responsible regarding to its observance. Once read, keep them for future consults that can arise.
• Do not attempt to repair and service this UPS. This UPS contains high voltages which could cause the risk of
electrical shock. Even this UPS is disconnected from the electrical outlet, the dangerous voltage still may be present
through the battery. All maintenance and battery replacement should be performed by qualified service personnel only.
• This is a class A product. In domestic use, this product can cause radioelectric disturbs and, in this case, the user
must take additional measures.
• This UPS is designed for Commercial/Industrial use only. It is not intended for use with life support application and other
designated «life-critical» devices.
• Do not remove the input power cord when this UPS is turned on. This removes the safety ground from this UPS and the
equipment connected to UPS.