SALICE F70 Clips, Installation Instructions Manual

Page: 28 / 40

PUSH: THE OPENING SYSTEM FOR HANDLE-LESS DRAWERS, FULLY INTEGRATED
IN THE RUNNER. A SLIGHT PRESSURE OF THE DRAWER FRONT IS SUFFICIENT FOR THE
DRAWER TO SELF-OPEN.
Product features:
- 70 Kg Dynamic load capacity
- Full-extension with synchronized movement of sliding elements to guarantee lateral
stability and a perfectly silent sliding movement
- Available in the full range of lengths from 350 mm in 50 mm increments to 750 mm
- Integrated Push opening system with 50 mm stroke for handle-less drawers
- The drawer is held in the closed position
- Clip with stamped steel elements
- Tool free side adju/- 1.5 mm, integrated into the clip
- Tool free depth adju/- 3 mm, integrated into the clip; through the oval slot on
the runner it is possible to obtain a further depth adjustment of +/- 4.5 mm
- Tool free height adju 2.5 mm, integrated into the clip; through the oval slot on
the runner it is possible to obtain a further height adjustment of +/- 6 mm
- Tool free tilt adju 3 mm (optional, when the optional lever is fitted)
- Synchronization system for the opening of large drawers (optional) available for all
runner lengths
- Max. drawer side thickness: 16 mm
- Compatible with Lineabox drawers
- Finish: bright zinc-plated
- 100% Made in Italy
F70 Push - Full-extension runner
Dimensions
Example: for a 400 mm inside cabinet width and a 16 mm thick drawer, subtract 10 mm from the inside width of 400 mm = 390 mm drawer width
Note: Drawer side material thickness may vary. Make sure you take precise measurements when calculating outside drawer width using the table
below. Inside drawer width must equal opening width minus 42 mm (1 21/32”) for F70 runners to align and function optimally.
CALCULATION FORMULA FOR OUTSIDE DRAWER WIDTH
For drawer side thickness of 16 mm (5/8”) 15 mm (19/32”) 14 mm (9/16”) 13 mm (1/2”) 12 mm (15/32”)
Deduct from inside cabinet width 10 mm (3/8”) 12 mm (7/16”) 14 mm (9/16”) 16 mm (5/8”) 18 mm (21/32”)
16 MAX
21
13 MAX
38
12
26
9.5
28.5
21
(X) Internal width of the cabinet
X - 42 mm to - 43.5 mm
Dra
w
er Height = opening height minus 21
(X)Larghezza interna mobile
MAX 16
21
13
12
26
9.5
28.5
21
(X - 42)
0
-1.5
Larghezza cassetto
Luce massima superiore 6
Altezza cassetto = Altezza aper
tura - 21
Altezza aper
tura
Per spessore cassetto pari a
Sottrarre dalla larghezza interna del mobile
16 mm 15 mm 14 mm 13 mm 12 mm
10 mm 12 mm 14 mm 16 mm 18 mm
Luce sotto il cassetto
Larghezza cassetto:
38
6 Minimum top clearance
28