SALICE F70 Clips, Installation Instructions Manual

Page: 32 / 40

F70 Push synchronizer
The synchronization system for Push-open F70 runners has been developed to ensure that drawers of any width
can be opened with minimum effort.
The system links the two runners, which then become a single element; applying pressure on any part of the drawer
front (even at the extremities), is sufficient for the Push devices to release and consequently for the drawer
to open.
The synchronizer can be used with any drawer width; its functionality is at its best with drawers wider than 80 cm.
PRODUCT FEATURES:
- perfectly silent sliding movement
- load capacity of the runner remains unchanged
- available on all runner lengths
- min. cabinet width (X) = 280 mm
- max. cabinet width (X) = 1305 mm
- bar length = 1150 mm (to cut to length)
Technical information
- Formula for cutting the bar to length
X = Internal width of the cabinet
The assembly of the synchronizer requires a minimum 75 mm notch in the rear of the drawer
X (1305 mm MAX)
BAR LENGTH (X - 155 mm) ± 1
75 mm MIN 75 mm MIN
13 mm MAX
(X - 155 mm) ±1
X
32