Salford SDD 4063, Assembly And Parts Manual, Page: 9 / 65

DANGER
ITEM NO. QTY. PART NO. DESCRIPTION
1 4 HS3536 3 1/2" BORE x 36" STROKE HYD. CYLINDER
2 4 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
3 4 GP1600512A05 PIN 1" DIA. x 5 1/2" LG. - 2 HOLES
4 8 BF16S 1" SAE WASHER
5 4 BSC0415 1/4" x 1 1/2" COTTER PIN
6 8 BSC0515 5/16" x 1 1/2" COTTER PIN
7 2 GP1600614C03 1" x 6 1/4" ORANGE HITCH PIN
8 4 GPSPEC24080 1 1/2" x 8 1/4" LG. WING HINGE PIN
9 4 BL10 5/8" LOCKWASHER
10 4 B1015 5/8 X 1 1/2" PLATED BOLT
11 4 GF1610 1/8" NPT GREASE FITTING
AIR DRILL WING INSTALLATION
1. Position main frame on stands. Use adequately strong stands or heavy wood blocks
to support the main frame about 36” above the floor of the assembly area. Make sure
the frame is stable, secure and reasonably level.
2. Install grease fittings (11) into wings at hinge points.
3. Install LH & RH wings. Lubricate the hinge pins (8) with grease and install as shown.
Retain the pin to the frame with a 5/8 x1 1/2" hex bolt (10) and lock washer (9).
4. Attach barrel ends of cylinders to lugs on main frame with 1" x 3 1/4" head pins (2)
and 1/4" x 1 1/2" cotter pins (5). Install cylinders so that the ports on the rod end are
facing down.
Connect hoses and charge the wing cylinders with
fluid following the procedure in the wing fold
hydraulics section of this manual before connecting
rod ends of the cylinders.
5. Attach rod ends of cylinders to lugs on wings with 1" x 5 1/2" pins (3), 1" SAE
washers (4), and 5/16" x 1 1/2" cotter pins (6). Washers go between lugs and cotter
pins.
6. Place wing lock pin (7) in holders provided under wing cylinder lugs and retain pin
with included #9 hairpin. Wing lock pins are under the front two wing cylinders only.
7. Apply grease to all fittings.
ITEM NO. QTY. PART NO. DESCRIPTION
1 4 HS3536 3 1/2" BORE x 36" STROKE HYD. CYLINDER
2 4 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
3 4 GP1600512A05 PIN 1" DIA. x 5 1/2" LG. - 2 HOLES
4 8 BF16S 1" SAE WASHER
5 4 BSC0415 1/4" x 1 1/2" COTTER PIN
6 8 BSC0515 5/16" x 1 1/2" COTTER PIN
7 2 GP1600614C03 1" x 6 1/4" ORANGE HITCH PIN
8 4 GPSPEC24080 1 1/2" x 8 1/4" LG. WING HINGE PIN
9 4 BL10 5/8" LOCKWASHER
10 4 B1015 5/8 X 1 1/2" PLATED BOLT
11 4 GF1610 1/8" NPT GREASE FITTING
Air Drill Parts and Assembly Manual
12-2007 Salford Farm Machinery Ltd. Page 7