Salford SDD 4063, Assembly And Parts Manual, Page: 27 / 65

ITEM NO. QTY. PART NO. DESCRIPTION
1 1 T00200 AIR DRILL AXLE TOWER
2 2 GBB175150075 1 3/4" x 1 1/2" x 3/4" LG. HARD BUSHING
3 1 C00080L AIR DRILL WING AXLE - LH
4 1 C00080R AIR DRILL WING AXLE - RH
5 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
6 1 A60025 AIR SEEDER WING TURNBUCKLE
7 1 HSR3712 3 3/4" BORE x 12" STROKE HYD. CYLINDER
8 1 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
9 1 BL10 5/8" LOCKWASHER
10 1 B1010 5/8"NC x 1" HEX BOLT
11 3 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
12 1 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
13 4 BSC0415 1/4" x 1 1/2" COTTER PIN
14 2 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
15 2 B1040 5/8"NC x 4" LG. HEX BOLT
16 2 BN10L 5/8" NYLOCK NUT NC
17 1 FL00051 LIGHT TURNBUCKLE LOCK
18 1 GP0800312L03 1/2" x 3 1/2" PARKING STAND PIN
19 1 GHP11 #11 HAIR PIN
AIR DRILL WING AXLE INSTALLATION
Note: quantities shown are for wing axle installation on one side only. Double quantities for
complete machine wing axle installation.
1. Insert hard bushing (2) into wing axle lug, line up axle tower (1) and upright of tandem axle
assembly (3, 4) with lugs on wing frames. Insert axle flatbar pin (8) through tower and axle.
Retain pin with 5/8" x 1" hex bolt (10) and 5/8" lockwasher (9). Note orientation of lugs on axle
towers.
2. Set wing turnbuckle (6 to 65" long pin to pin. Attach turnbuckle to axle tower with 1" x 2
5/8" head pins (12) and 1/4" x 1 1/2" cotter pins (13). Place turnbuckle lock (17) over
turnbuckle and attach to frame with 1" x 3 1/4" head pin (11) and 1/4" x 1 1/2" cotter pin (13).
Secure turnbuckle lock to turnbuckle with 1/2" x 3 1/2" L-pin (18) and #11 hairpin (19).
3. Attach 3 3/4" x 12" hydraulic cylinder (7) to axle tower and axle beam with 1" x 3 1/4" head
pins (11) and 1/4" x 1 1/2" cotter pins (13). Connect hoses and charge lift axle cylinders with
fluid following the procedure in the hydraulics installation before connecting rod ends of the
cylinders.
4. Insert 5000 lb hub and spindle assemblies (14) into axles and retain with 5/8" x 4" hex
bolts (15) and 5/8" locknuts (16).
5. Apply grease to all fittings.
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 T00200 AIR DRILL AXLE TOWER
2 2 GBB175150075 1 3/4" x 1 1/2" x 3/4" LG. HARD BUSHING
3 1 C00080L AIR DRILL WING AXLE - LH
4 1 C00080R AIR DRILL WING AXLE - RH
5 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
6 1 A60025 AIR SEEDER WING TURNBUCKLE
7 1 HSR3712 3 3/4" BORE x 12" STROKE HYD. CYLINDER
8 1 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
9 1 BL10 5/8" LOCKWASHER
10 1 B1010 5/8"NC x 1" HEX BOLT
11 3 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
12 1 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
13 4 BSC0415 1/4" x 1 1/2" COTTER PIN
14 2 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
15 2 B1040 5/8"NC x 4" LG. HEX BOLT
16 2 BN10L 5/8" NYLOCK NUT NC
17 1 FL00051 LIGHT TURNBUCKLE LOCK
18 1 GP0800312L03 1/2" x 3 1/2" PARKING STAND PIN
19 1 GHP11 #11 HAIR PIN
Air Drill Parts and Assembly Manual
12-2007 Salford Farm Machinery Ltd. Page 25