37
Options for switching off the scale
If the scale remains idle for more than 10 seconds, the display will automatically switch
off. After 30 seconds of inactivity, the entire scale automati
cally shuts down.
ERROR MESSAGES
Lo
... low battery indication. Replace the batteries with new ones.
Err
... the maximum weighing capacity (180 kg) has been exceeded. Get off the scale
immediately, otherwise the weighing sensors or the entire product may be irreversibly
damaged.
-Err
... the scale sensors were loaded before switching on. Wait about 2 seconds for the
scale to reset itself.
C
... there was a weighing error. Repeat the weighing.
BATTERY CHANGE
1.
Open the battery compartment cover at the bottom of th
e scale.
2.
Remove the old batteries and insert the new batteries into the battery
compartment. Make sure to observe the correct polarity, which is marked on
the bottom of the battery compartment.
3.
Close the battery compartment by snapping its cover back on.
Warning:
•
Do not use rechargeable batteries to power the scale, their voltage may not be
sufficient to power the scale.
•
Do not combine old and new batteries due to their different residual
capacities. A low battery error indication could be displayed premat
urely and
all batteries may need to be replaced.
CLEANING AND MAINTENANCE
•
Never clean the scale under running water, rinse it or immerse it in water.
•
Use a soft cloth dampened with lukewarm water to clean the outside of the
scale. Do not use harsh cleaners
, thinners or solvents or the scale surface may
be damaged.
