16
| EN
SMARTY RV v2019.12
Figure 6.4.2 - Smarty 2R VER plus
Be sure the unit is disconnected from power source before performing any maintenance or repair.
6.5. HEATER MAINTENANCE
• # "
• $ % & '! *+/34 !
+100°C.
• After the activation of the manually restored protection, the unit must be disconnected from the power supply. Wait until the heating elements
cool down and the fans stop rotating. After identifying and removing the reason of failure, to start the unit, press the “reset” button. The failure
" 7"
• If necessary, the electric heater can be removed. Disconnect the electrical connector from the heater and remove the heater.
Figure 6.5.1 - Smarty 2R VER
a
a
b
1
2
3
Figure 6.5.2 - Smarty 2R VER plus
6.6. ROTOR MAINTENANCE
• Rotor heat exchanger must be serviced once a year.
• Ensure that the gaps of the heat exchanger are clean, the brushes are not worn, the belt drive is not worn and the clamping nodes of the rotor
heat exchanger are tight.
• Rotor heat exchanger can be easily removed from the unit. The power cord of the motor of the heat exchanger is disconnected. The clamp of
rotor heat exchanger section is released and raised and the heat exchanger is removed.
• The heat exchanger is cleaned using the solution of warm water and non-corrosive toward aluminum alkaline agent or the air stream. It is not
recommended to apply direct stream of liquid as it can harm the device.
Summary of Contents for SMARTY R V
Page 1: ...SMARTY R V EN MOUNTING AND INSTALLATION INSTRUCTION...
Page 53: ...53 SMARTY RV v2019 12...
Page 54: ...54 SMARTY RV v2019 12...
Page 55: ...55 SMARTY RV v2019 12...
