Salda SMARTY R V, Mounting And Installation Instruction

Page: 15 / 56

EN | 15 SMARTY RV v2019.12
6.3. FILTERS MAINTENANCE
Figure 6.3.1 - Smarty 2R VER Figure 6.3.2 - Smarty 2R VER plus
!
• Open cover.
• *!
" " #
panel technical documentation or on the website www.salda.lt.
$% % &
' # +;<
6.4. FANS MAINTENANCE
•
• The fan should be inspected and cleaned at least once a year.
• Be sure the fan is disconnected from power source before performing any maintenance or repair.
• Proceed to maintenance and repair after any rotation in the fan is stopped.
•
• The motor is of heavy duty ball bearing construction. The motor is completely sealed and requires no lubrication for the life of the motor.
• Detach fan from the unit.
• Impeller should be specially checked for buil-up material or dirt which may cause an imbalance. Excessive imbalance can lead to accelerated
wear on motor bearings and noise, vibration.
• Clean impeller and inner housing with mild detergent, water and damp, soft cloth.
• Do not use high pressure cleaner, abrasives, sharp instruments or caustic solvents that may scratch or damage housing and impeller.
•
• Make sure, that impeller’s balance weights are not moved.
• Make sure the impeller is not hindered.
• Mount the fan back into the unit. Connect the fan to power supply source.
• ! "
in the system (when pressure switches are connected). When there is a fault in fans’ motor, any separate notice is shown on the control panel.
Figure 6.4.1 - Smarty 2R VER