2
| EN
KUB T120_KUB EKO v2019.04
SYMBOLS AND MARKING
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/
000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0
/Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
1
4
5
2
6
3
Figure 1.1 - Technical label
1 - Logo; 2 - Product code (SKU); 3 - Product name; 4 - Technical data; 5 - Production place; 6 - Lot number and production date.
Techninis
lipdukas
XXX GAMINIO PA VADINIMA S
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
Weight
/
xxx/xx VAC/Hz
x.xx A
x.xx kW
IP xx
xx kg
Made in Šiauliai, Lithuani a
FAN000040
BN:xxxxxx
2019/01/01
Techninis
lipdukas
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/
000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0
/Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/
000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0
/Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/
000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0
/Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/
000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0
/Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/
000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0
/Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Figure 1.2 - Fan kitchen box ins. and Fan box insulated technical lable place
Figure 1.3 - Indication for air flow direction.
SAFETY INSTRUCTIONS AND WARNINGS
Warning – pay attention
Additional information
GENERAL INFORMATION
Before installing the unit read the entire information provided in this document.
Installation of the unit shall only be performed by trained and qualified personnel aware of installation of such type of units, inspection, mainte
-
nance and tools required for installation works.
While installing the unit, observe the international and national mechanical and electrotechnical safety requirements of the country in which the
product is installed and used.
If the provided information is unclear or any doubts arise regarding safe installation and operation, please contact the manufacturer or represent
-
ative.
The unit shall be operated only under the below listed conditions.
It is strictly forbidden to use the unit for non-designed purposes or in contradiction to the specified working conditions without written permission
of manufacturer or representative.
The manufacturer or representative shall be notified about any fault, including description of the fault and data specified on the product’s label.
Any repair or dismantle of the unit in case of fault is forbidden without previous written permission of manufacturer or representative.
Dismantling, repair or modification of the unit shall be performed only upon previous written consent from manufacturer or representative.
Before ordering and installing the unit the end user shall ensure that the unit is suitable for environmental conditions.
SAFETY PRECAUTIONS
Do not use this unit for purposes other than those provided in its design.
Do not dismantle and modify the unit. Such actions can cause mechanical fault or even injury.
Use special working clothes when installing and maintaining the unit. Be careful – angles and edges of the unit and its components are sharp and
can cause injuries.
Being near the unit, do not wear free streaming clothes that could be sucked into the operating fan.
All products packed in the factory are not prepared for eventual operation. The units can be used only after connecting them to air ducts or after
installing protection grating in air intake and discharge openings.
Do not put fingers or any other objects into protection grating of air intake and discharge or into connected air duct. In case any foreign body gets
into the unit, disconnect the power supply source immediately. Before removal of foreign body, make sure that any mechanical movement in the
unit has stopped. In addition, make sure that the accidental switching-on of the unit is impossible.
Avoid direct contact with the flow of supplied and extracted air.
Do not connect the unit to the mains other than indicated in the product label on the casing of the unit.
Never use a damaged power supply cable.
