6
7
Pre-installation
Installation
PumpWise guidelines
General specification
Trouble shooting
PumpWise and warranty
Pre-installation
Installation
PumpWise guidelines
General specification
Trouble shooting
PumpWise and warranty
Typical installations – RSP and RHP pumps
Right Shower Pumps (RSP)
Designed purely for showers. The right
shower pump is best determined by the
customer’s expectations and choice of
shower head.
Figure 6: Right pump fitted in loft above
cylinder outlet
MAX
60°C
Outlets
Inlet
Min
600mm
Usable capacity
minimum 50 gallons
per bathroom
Vent and other
services
Non-return valve
hot outlet only
Air vents, both
hot and cold
No Stop Essex Flange
MUST be used with an
anti gravity loop at least
200mm in depth
C
H
MAX
60˚C
No Stop Essex Flange
MUST be used with an
anti-gravity loop at
least 200mm in depth
Min 600mm
Vent and
other services
Inlet
Inlet
Outlet
Outlet
Air vents,
both hot
and cold
Cold water storage
H
C
Fig 4 Right shower pumps (RSP)
OLD STYLE DO NOT USED
Fit an
equilibrium
ball valve
600mm or
less possible
negative head
Positive head
Usable capacity
minimum 50 gallons
per bathroom
The hot
connection
must be via
an approved
side or top
entry flange
(see page 16)
Vent and
other
services
Cold water storage
MAX
65˚C
H
C
Outlet
Inlet
Outlet
Inlet
Washing
machine
Fig 6 Right whole house pumps (RSP)
OLD STYLE DO NOT USED
Vent
and other
services
Usable capacity
minimum 50 gallons
per bathroom
Positive
head
Outlets
Inlet
Washing
machine
MAX
65°C
C
H
The hot
connection
must be via
an approved
side or top
entry flange
see col. 3 page 10
Fit an
equilibrium
ball valve
2 feet or less
possible negative head
The hot
connection
must be via
an approved
side or top
entry flange
see col. 3 page 10
Vent and other
services
Usable capacity
minimum 50 gallons
per bathroom
Positive head
Outlets
Inlet
MAX
65°C
C
H
2 feet or less
possible negative head
600mm or
less possible
negative head
Positive head
Usable capacity
minimum 50 gallons
per bathroom
The hot
connection
must be via
an approved
side or top
entry flange
(see page 16)
Vent and
other
services
Cold water storage
MAX
65˚C
H
C
Outlet
Inlet
Outlet
Inlet
Fig 5 Right pump feeding one shower
OLD STYLE DO NOT USED
In positive head systems, allow for increased
resistance of long pipe runs with multiple
bends. The natural flow from the shower
head or other outlets MUST be at least
1 litre/min per side (hot or cold).
Figure 7
Right whole House Pumps
(RHP)
Equipped with a bypass loop. Selection of
the Right whole house pump for a system
will be determined by the resistance of,
quantity of and the pressure required by,
the outlets.
In these systems
• Toilets MUST be fitted with an equilibrium
ball valve.
Figure 8: Whole house system with any
RHP twin pump
!
ESP CPV pumps – system operation and
L.E.D. indication
With electronic system protection
ESP CPV pumps are the culmination
of four years intensive research
to develop advanced pumps
incorporating micro electronic
technology and sensors capable of:
• Positive or negative head operation
• Supply water temperature sensing
• Dry run protection
• Sensing chronic aeration or water
starvation
• L.E.D. indication of system function and
any unforeseen system malfunction
IMPORTANT NOTE
The HOT and COLD pump ends are identified
by RED (hot) and BLUE (cold) tie wraps.
See above illustration.
Cold pump end
L.E.D. indication
Hot pump end
Pressure vessel
ESP CPV pumps have been designed
to protect customers by responding to
unexpected or unforeseen conditions.
ESP CPV pumps will only be switched ‘OFF’
if the unexpected or unforeseen conditions
are serious.
System operation and system malfunction
is indicated via five L.E.D’s located on top of
the pump junction box, see Figure 9.
For ESP CPV pumps only
NON-RETURN
VALVES MUST NOT be fitted in the
discharge pipework between the pump
outlets and system outlets unless
specified by Salamander.
Either side of these pumps can be used for
hot or cold water.
SAL6479 Pumps Install DocAW1 .indd 6-7
29/09/2011 11:27
