background image

Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS50/ML095

 

 501-765  [12.22]           page  4 of 10

Mounting EZ-Touch Mount Body to Wall

 

Unpack the EZ-Touch and remove the plastic cover and two foam blocks.

Locating your mount

WOOD CONSTRUCTION:  

locate two framing studs (minimum of 16” (405 mm) apart) at the desired location using a stud 

finder device. 

MASONRY:  

a minimum width of 16” (405 mm) is required between fasteners.

Packing Foam

Block (2x)

Plastic Cover

Plastic Cover

Packing Foam

Block (2x)

Remove Plastic Cover and Foam Blocks

Installation of EZ1/MS50/ML095 Mount Body

Prepare Mounting Site

The EZ-Touch was designed to be installed on a 16” on center 2” x 4” wood stud, or metal studs, using 

high-quality hollow wall anchor installed in the center of the stud  

or a solid concrete wall.  

WARNING: INSTALLING THE MOUNT IN UNDERRATED OR DAMAGED CONCRETE CAN LEAD TO 

SERIOUS INJURY OR DAMAGE TO PRODUCT! When installing into concrete only install the mount in a 

solid concrete wall made of 2500 PSI (17.3 MPa)  

or stronger concrete. Never install the mount into cracked, chipped or flaking concrete. 

WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SERIOUS 

PERSONAL INJURY OR DAMAGE TO EQUIPMENT!  It is the installers responsibility to make sure the 

structure to which the EZ-Touch is being installed is capable of supporting three times the combined 

weight of the EZ-Touch and all  

attached equipment is not to exceed the following weight capacities:

EZ1/MB16/152: 90-152lbs / 40-69kg

Summary of Contents for EZ1/MS50/ML095











Reviews: