1
Contents
Pre-installation checklist
2
Application notes
3/4
Typical installations
5
Commissioning
6
General specifications
7
Lighting codes & Trouble shooting
9
Fittings Kit
10
PumpWise and warranty
11
To the installer
12
Terms and conditions
12
Pump installation and warranty guide for
Home
Boost
and Combi
Boost
Important – read this first!
HomeBoost™ and CombiBoost have two separate and distinct applications. The first is for use
on the incoming domestic cold water mains supply, and the second is directly on the combi-boiler
cold water inlet.
HomeBoost™ is designed to boost your existing incoming mains water supply up to 12 litres per
min (lpm). The intelligent control ensures that it reacts and responds to give a stable outflow, and
is unrestrictive if your natural water flow reaches 12lpm or more naturally.
CombiBoost is designed to boost your existing incoming mains water supply up to 10 litres per
min (lpm).
Correct installation is essential for safe operation and a trouble free system. It is therefore
important to read these instructions thoroughly and ensure that you comply with them. Incorrect
fitting will invalidate the warranty.
If your installation is complicated or you have any questions, please consult the PumpWise
Technical Helpline immediately (0191 516 2002).
We encourage installers to consult the Salamander helpline before installation, where our
technical advisers can give you professional advice regarding installation. When the job is
finished, please complete the warranty registration on our website www.salamanderpumps.co.uk
or by calling 0191 516 2002.
Please leave this installation guide with the customer for reference to maintenance and safety
information.
Thank you for choosing
Salamander Pumps