Salamander Designs - Electric Lift, Wall Display Stands Designed for Surface www.salamandercommercial.com
501-685-MS [4.20] page 9 of 24
Operation: Remote Control
• Hold down the “down” button to initialize unit.
• Up button will raise display to presentation mode
• Down button will lower display to transport mode.
Troubleshooting
• Double check that power cord is firmly plugged into power supply
•
Hold down the “down” button continuously for several seconds to reset unit
• More troubleshooting and repair information found on page four of this manual
1.
Re-install the inner panel using 2 screws removed in first step.
2. Re-install panel by aligning all 4 screws protruding from panel through
the keyhole shapes on stand.
Note: Outer panel may be secured
in place by tightening the fasteners on the backside of the panel.
1
2
