26
PLAY:
auto-station search and storage, press again to quit. A long press disconnects the connected device.
PREV / NEXT:
briefly press to switch to the next stored radio station
● Keep the antenna cable away from metal objects.
● Pressing the
PREV
and
NEXT
button controls the volume of the radio.
● Search stops when it detects a variable signal strength - this does not always mean finding a radio program.
● The reception of the radio depends to a great extent on the location of use and the current reception conditions.
WIRELESS BT CONNECTION
In addition to wired inputs, external devices can be connected via wireless BT connection. For example, a mobile phone, tablet, computer or smart TV
with BT protocol. Press the
MODE
button to select
BT
mode. The display briefly shows
„BT NOT LINK”
and then
„CONNECTING”
. In the directions
for use of the device to be paired, find the nearby BT devices, including this amplifier. Connect the two devices together. In case of success, the external
device ID will be displayed on the display and the desired program will be heard after a short beep from the speakers.
PLAY:
playback on the mobile player’s music player, press again to pause
PREV / NEXT:
briefly press to switch to the previous or next track
● Pressing the
PREV
and
NEXT
button controls the volume level.
● Before starting the process, disconnect any BT devices connected to your mobile device.
● To find BT a connection, it takes approx. 30 seconds. You have this time to set up your mobile device properly. The search for the BT connection
is continuous, until a successful connection, the text „BT NOT LINK” can be read on the display. If necessary, exit and return to BT Mode (
MODE
)
to repeat the pairing.
● A device can be paired wirelessly with only one BT device at a time.
● When turned on, it will automatically re-connect to the previously paired and properly connected device if it is switched on nearby.
● If the wireless connection is lost, turn the BT mode on and off again if necessary, to enable pairing mode again.
● When a phone call is received on the connected mobile phone while listening to music, the music playback is paused. After the conversation,
restart playback on the phone.
● The actual range depends on the other device and the ambient conditions. (e.g. walls, human bodies, other electrical devices, movement ...)
● Abnormal operation, noise can be caused by nearby radio equipment, this does not indicate a malfunction of the device.
● Abnormal operation may be caused by the specific features of the external device, which does not indicate any defects in the device.
Occasionally, the BT function may be limited due to the specific features of the external device.
USB/SD - MP3/WMA PLAYBACK
If no USB or SD device is inserted, the display will show
„Cannot find device”
- if you previously have selected the MP3 / WMA playback mode with the
MODE
button. Irrespective of the current mode, playback starts when the external device is inserted. During playback, detailed information is displayed:
the total number of songs, the currently played song, the current song’s playing time and the time remaining for the song, audio format and sampling
frequency, playback and repeat modes... Press MODE button long to turn off mp3 playback, and press it long again to turn it on.
PLAY:
playback, press it again to pause, and then resume playback
PREV / NEXT:
briefly press to switch to the previous or next track
EQ:
press the REPT button long to display the equalizer, then select the desired tone ( NOR, POP,ROCK,JAZZ,CLAS,COUN ). Tone control only affects
programs played in USB/SD and BT mode.
STOP:
pressing it takes you to a menu from which you can access the library structure (FOLDER), or returns to music playback using the MODE button.
When FOLDER is selected, the music stops, and it is possible to select between the tracks within the other library structures. Playback of the
selected track can be started by pressing the STOP button again.
RPT:
press repeatedly to set the playback (repeat) mode. The arrow symbol in the upper left corner of the display and the character below refer to the
current mode.
● Press
PREV
and
NEXT
briefly for stepping in the playlist when it is shown on the display.
● Pressing
PREV
and
NEXT
controls the volume of the music player.
● The playlist displays detailed text data only when it is recorded with the MP3 / WMA file.
● Do not remove the memory card or USB device during playback, as this may cause data corruption.
● Recommended file system: FAT32. Do not use a NTFS formatted memory unit.
● When the memory unit is inserted, playback starts from the first song. If you have already listened to, the playback of the last track selected will
resume even when you turned off the device and removed the storage unit.
● Only MP3 and WMA files that can be played on this unit may be on the storage.
● Abnormal operation may be caused by the unique features of the storage device, which does not indicate a malfunction of the device.
STEREO AUDIO INPUT (LINE IN) AND MICROPHONE INPUT (MIC IN)
If there are devices that are supplied with a 2xRCA audio output, you can connect three of them at the same time to the inputs of the mixer amplifier.
When the stereo signal arrives at the stereo input, it is processed as a mono signal. The built-in amplifier is a single channel and the LINE OUT output
provides a mono signal. With three wired audio sources, two microphones can be used so that all five sources can be individually controlled.
● Keep in mind that the LINE3 controller controls the level of the multimedia unit as well.
● You can set the output level of the multimedia unit by pressing the
PREV / NEXT
buttons.
● The available sound quality depends on the quality of the audio signal provided by the external device, as well as its volume and sound settings.
● It is recommended to turn off the equalizer on the external devices and use it only on the amplifier.
● The small signal entering the amplifier (volume) may cause excessive noise, and excessive signal may cause distortion. It is recommended that
the signal level be maintained at medium level.
● If the audio output does not receive a 2xRCA plug, you may need to obtain an external adapter or a connecting cable. The device does not
include an audio cable.
SPEECH-DRIVEN MUSIC MIXING (CROSSFADER)
Pressing the
PROMT
button on the front panel, you will hear a beeping sound, and then the current source and music will blur. By using the microphone
connected to the
MIC2
jack on the front panel, you can terminate a speech, than the music will automatically return to the original setting.
