Sakai SV540 Series, Shop Manual

Page: 157 / 306

6-036
VIBRATORY DRUM • REAR AXLE
37) Secure vibrator motor (26) to cover (24) with two new
thread sealant bolts (28) and washers.
(26) Vibrator motor : 20 kg (44 lbs.)
N•m
(28) Bolts M14×40 : 108 N·m (80 lbf·ft)
Wind seal tape around the threaded portion of breather
(23).
Install breather (23).
(NOTICE)
When installing the vibrator motor, take care not to
allow the O-ring to protrude from the fitting groove.
38) Lift vibratory drum assembly with a crane and lay it with
plugs positioned as shown on the right.
Hold with chocks.
Vibratory drum assembly
SV540D : 4,425 kg ( 9,755 lbs.)
SV540T : 4,750 kg (10,472 lbs.)
SV540TF : 7,155 kg (15,774 lbs.)
SV540DF : 6,110 kg (13,470 lbs.)
SV640D : 4,475 kg ( 9,866 lbs.)
SV640T : 4,805 kg (10,593 lbs.)
(NOTICE)
Make sure that the drum is placed on level ground.
39) Remove plugs (11-1) and (11-3).
Supply gear oil from oil supply port.
Check that oil drips from gauge port.
Quantity of gear oil : 34 L (9.0 gal.)
Reinstall plugs (11-1) and (11-3).
•
•
•
•
•
•
•
•
•
SV510-
ޓ
-06089
23
28
26
24
SV510-
ޓ
-06089
23
28
26
24
SV510- -06090
11-1
11-3 11-2
Chock
SV510- -06090
11-1
11-3 11-2
Chock
SV510- -06091
11-1
11-3 Gauge port
Supply port
SV510- -06091
11-1
11-3 Gauge port
Supply port