5.2
Commissioning
Talbe
5.1
Instructions of the Inte ace
LED o
Breathing
Solid
Breathing
Solid
Solid
On 1s, o 1s
On 1s, o 3s
O
Solid
On 1s, o 1s
On 1s, o 3s
O
Solid
On 1s, o 1s
On 1s, o 3s
O
Solid
On 1s, o 1s
O
Solid
On 1s, o 1s
O
Solid
On 1s, o 1s
On 1s, o 3s
O
Solid
On 1s, o 1s
O
Sta up:
(1) Connect the AC circuit breaker
(2) Connect the DC circuit breaker between inve er and batte (if applicable)
(3) Turn ON the batte (if applicable)
(4) Turn ON the DC switch on the inve er
(5) Install the communication module into the inve er
(6) Setup the initial setting for inve er on eSolar APP
(7) Obse e the LED indicators on the inve er to ensure the inve er is running properly
Status
Inve er power o
Inve er is at initial state or standby state
Inve er running properly
Inve er is upgrading
Inve er is faulty
Impo ing electricity from grid
Expo ing electricity to grid
Not impo ing and expo ing at all
O -grid
Batte is discharging
Batte is charging
SOC low
Batte is disconnected or inactive
Connected to grid
Counting down to grid connection
Grid is faulty
No grid
PV array is running properly
PV array is faulty
PV array is not operating
AC side load is running properly
AC side load overload
AC side is turned o
Both BMS and meter communication are good
Meter communication is good, BMS communication is lost
Meter communication is lost, BMS communication is good
Both meter and BMS communication are lost
Connected
Connecting
Disconnected
Description
LED indicator
System
Batte
Grid
PV
Backup
Cloud
Communication
34
33
5.3
eSolar APP
Connection
Login
to
eSolar
O&M
APP
and
click on “My” and select “Remote Con guration”
Click on “Bluetooth” and activate the Bluetooth function on your phone, then click on “Next”
Choose your inve er according to your inve er SN’s tail numbers
Click on the inve er to enter inve er setting
Step 1
Step 2
Step 3
Step 4
ROOFTOP SOLAR INVERTER
INSTRUCTION MANUAL
