30
Fill water, ice full LEDs
are lit together
Ice making box
reset in bad
condition
1.
Check whether there have objects stuck
in the ice box
2.
The internal parts wear, send to
professional service maintenance
department
Ice making in poor
condition
1.
Poor heat
dissipation
2.
Water for
ice making
temperature is
too high
3.
The ambient
temperature is
too high
4.
Leakage of
refrigerant
1.
Clean the dust of cooling fans and in come
&out come gates of wind
2.
Pour into the ice making water at room
temperature
3.
Do not put the machine into environment
at high temperature
4.
Cooling system failure, send to
professional service department to
maintenance
Unusual noise
Wear of a fan or
pump
1.
Ensure proper placement
2.
Send to professional service department to
maintenance
IX .CLEAN AND STOP USE VIII IX X
1.
Be sure to unplug the power plug before cleaning and a long time
standby.
2.
Clean or wipe the outer surface of the product with a soft cloth.
3.
Water tank cleaning.
1). Unscrew the nut of water outlet, Release out of the ice water.
2). Pour clean water into the water tank, use a clean cloth to wipe
water tank room around, till ice water drain outlet release all of the
water, tighten the nut, pay attention to sealed with the plug.before
grip the nut.
4.
Do not use organic solvents, boiling water, cleaning agents, strong
acids, strong acid and Alkaline etc substances for cleaning;
5. If ice machine will standby for a long time, you should
unplug the power cord, put the ice water system deam
and dry with a dean doth,place in a dean place to storage.
X. TECHNICAL PARAMETERS
Model No.:
FHS2012
FHS 2012.indd 30
4/18/2016 4:51:17 PM
